Latent Heat Storage (LHS)
A common approach to thermal energy storage is to use materials known as phase change materials (PCMs). These materials store heat when they undergo a phase change, for example, from solid to liquid, from liquid to gas or from solid to solid (change of one crystalline form into another without a physical phase change).
The phase change “solid-to-liquid” is the most used, but also solid-to-solid change is of interest. These materials can be used as an effective way of storing thermal energy (solar energy, off-peak electricity, industrial waste heat). In comparison to sensible heat storage systems, the latent heat storage has the advantages of high storage density (due to high latent heat of fusion) and the isothermal nature of the storage process. The heat of fusion or the heat of evaporation is much greater than the specific heat capacity. The comparison between latent heat storage and sensible heat storage shows that in latent heat storage storage densities are typically 5 to 10 times higher.
In general, latent heat effects associated with the phase change are significant. Latent heat, known also as the enthalpy of vaporization (liquid-to-vapor phase change) or enthalpy of fusion (solid-to-liquid phase change), is the amount of heat added to or removed from a substance to produce a change in phase. This energy breaks down the intermolecular attractive forces, and also must provide the energy necessary to expand the substance (the pΔV work). When latent heat is added, no temperature change occurs.
Phase Change Material
Phase Change Materials (PCM) are latent heat storage materials. It is possible to find materials with a latent heat of fusion and melting temperature inside the desired range. The PCM to be used in the design of thermal storage systems should accomplish desirable thermophysical, kinetics and chemical properties.
- Suitable phase-transition temperature for the specific application.
- High latent heat of phase transition in order to occupy the minimum possible volume. .
- Melting temperature in the desired operating temperature range.
- High specific heat to provide for additional significant sensible heat storage.
- High thermal conductivity in order to minimize temperature gradient and to assist the charging and discharging of energy of the storage systems.
- Small volume changes on phase transformation and small vapor pressure at operating temperatures to reduce the containment problem.
- High nucleation rate to avoid supercooling of the liquid phase.
- High rate of crystal growth, so that the system can meet demands of heat recovery from the storage system.
- Non-toxic, non-flammable, and non-explosive materials for safety reasons.
- Long-term chemical stability and complete reversible melt/freeze cycle.
- No degradation after a large number of freeze / melt cycles.
- Low corrosivity
Finally, the material must be abundant, available and cheap to help into the feasibility of the use of the storage system.
There are a large number of PCMs, they can be divided into three groups:
- Organic PCMs
- Inorganic PCMs
- Eutectic PCMs
As an example, thermal energy storage can be used in concentrating solar power stations (CSP), in which the principal advantage is the ability to efficiently store energy, allowing the dispatching of electricity over up to a 24-hour period. In a CSP plant that includes storage, the solar energy is first used to heat the molten salt or synthetic oil to store thermal energy at high temperature in insulated tanks. Later hot molten salt is used for steam production to generate electricity by steam turbo generator as per requirement. The use of both latent heat and sensible heat in concentrating solar power stations are possible with high temperature solar thermal input. Various eutectic mixtures of metals, such as Aluminium and Silicon (AlSi12) offer a high melting point (577°C) suited to efficient steam generation, while high alumina cement-based materials offer good thermal storage capabilities.
Thermal Energy Storage
In thermodynamics, internal energy (also called the thermal energy) is defined as the energy associated with microscopic forms of energy. It is an extensive quantity, it depends on the size of the system, or on the amount of substance it contains. The SI unit of internal energy is the joule (J). It is the energy contained within the system, excluding the kinetic energy of motion of the system as a whole and the potential energy of the system. Microscopic forms of energy include those due to the rotation, vibration, translation, and interactions among the molecules of a substance. None of these forms of energy can be measured or evaluated directly, but techniques have been developed to evaluate the change in the total sum of all these microscopic forms of energy.
In addition, energy is can be stored in the chemical bonds between the atoms that make up the molecules. This energy storage on the atomic level includes energy associated with electron orbital states, nuclear spin, and binding forces in the nucleus.
Thermal energy can be also very effectively stored. Nowadays, situation on energy markets is different. The increasing on the prices of the conventional energy sources and the environmental awareness have leaded to increase the use of renewable energies and the energy efficiency. Thermal energy storage forms a key component of a power plant for improvement of its dispatchability, especially for concentrating solar power plants (CSP). Thermal energy storage (TES) is achieved with widely differing technologies. There are three methods used and still being investigated in order to store thermal energy.
- Sensible Heat Storage (SHS)
- Latent Heat Storage (LHS)
- Thermo-chemical Storage
We hope, this article, Latent Heat Storage – LHS, helps you. If so, give us a like in the sidebar. Main purpose of this website is to help the public to learn some interesting and important information about thermal engineering.